NSE8_812練習問題集、NSE8_812模擬モード

FortinetのNSE8_812試験に受かることは確かにあなたのキャリアに明るい未来を与えられます。FortinetのNSE8_812試験に受かったら、あなたの技能を検証できるだけでなく、あなたが専門的な豊富の知識を持っていることも証明します。CertJukenのFortinetのNSE8_812試験トレーニング資料は実践の検証に合格したソフトで、手に入れたらあなたに最も向いているものを持つようになります。 CertJukenのFortinetのNSE8_812試験トレーニング資料を購入する前に、無料な試用版を利用することができます。そうしたら資料の高品質を知ることができ、一番良いものを選んだということも分かります。

Fortinet NSE8_812試験は、ネットワークセキュリティの概念と技術に深い理解を持つことが必要な難解な試験です。この試験は、理論的な知識と実践的なスキルの両方をテストするように設計されており、試験を受験する前に、少なくとも5年間のネットワークセキュリティの経験を持つことが推奨されています。

>> NSE8_812練習問題集 <<

NSE8_812模擬モード & NSE8_812関連資格知識

当社CertJukenのNSE8_812学習準備は、自己学習、自己評価、統計レポート、タイミング、およびテスト刺激機能を強化し、各機能はクライアントが包括的に学習するのに役立つ独自の役割を果たします。 NSE8_812ガイド資料の自己学習および自己評価機能は、クライアントがNSE8_812学習資料の学習結果を確認するのに役立ちます。 NSE8_812トレーニングクイズのタイミング機能は、学習者が速度を調整して質問に答え、Fortinet NSE 8 - Written Exam (NSE8_812)アラートを維持するのに役立ちます。学習教材はタイマーを設定します。

Fortinet NSE 8 - Written Exam (NSE8_812) 認定 NSE8_812 試験問題 (Q86-Q91):

質問 # 86
Refer to the exhibits.

The exhibits show a diagram of a requested topology and the base IPsec configuration.
A customer asks you to configure ADVPN via two internet underlays. The requirement is that you use one interface with a single IP address on DC FortiGate.
In this scenario, which feature should be implemented to achieve this requirement?

A. Use local-id
B. Use network-overlay id
C. Use peer-id
D. Change advpn2 to IKEv1

正解：B

解説：
A is correct because using network-overlay id allows you to configure multiple ADVPN tunnels on a single interface with a single IP address on the DC FortiGate. This is explained in the FortiGate Administration Guide under ADVPN > Configuring ADVPN > Configuring ADVPN on the hub. References: https://docs.
fortinet.com/document/fortigate/7.4.0/administration-guide/978793/advpnhttps://docs.fortinet.com/document
/fortigate/7.4.0/administration-guide/978793/advpn/978794/configuring-advpn
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Use-case-of-Network-Ids-with-ADVPN-shortcut
/ta-p/241025

質問 # 87
Refer to the exhibit.

FortiManager is configured with the Jinja Script under CLI Templates shown in the exhibit.
Which two statements correctly describe the expected behavior when running this template? (Choose two.)

A. The template will work if you change the variable format to {{ WAN }}.
B. The template will fail because this configuration can only be applied with a CLI or TCL script.
C. The template will fail because this configuration can only be applied with a CLI or TCL script.
D. The template will work if you change the variable format to $(WAN).
E. The Jinja template will automatically map the interface with "WAN" role on the managed FortiGate.
F. The administrator must first manually map the interface for each device with a meta field.

正解：C、F

解説：
The Jinja template in the exhibit is trying to configure the interface role on the managed FortiGate. This type of configuration can only be applied with a CLI or TCL script. The Jinja template will fail because it is not a valid CLI or TCL script.
Explanation:
d) The administrator must first manually map the interface for each device with a meta field.
The Jinja template in the exhibit is expecting a meta field called WAN to be set on the managed FortiGate. This meta field will specify which interface on the FortiGate should be assigned the "WAN" role. If the meta field is not set, then the template will fail.

質問 # 88
Refer to the exhibits.
The exhibits show a diagram of a requested topology and the base IPsec configuration.
A customer asks you to configure ADVPN via two internet underlays. The requirement is that you use one interface with a single IP address on DC FortiGate.
In this scenario, which feature should be implemented to achieve this requirement?

A. Use local-id
B. Use network-overlay id
C. Use peer-id
D. Change advpn2 to IKEv1

正解：B

解説：
A is correct because using network-overlay id allows you to configure multiple ADVPN tunnels on a single interface with a single IP address on the DC FortiGate. This is explained in the FortiGate Administration Guide under ADVPN > Configuring ADVPN > Configuring ADVPN on the hub. References: https://docs.fortinet.com/document/fortigate/7.4.0/administration-guide/978793/advpn https://docs.fortinet.com/document/fortigate/7.4.0/administration-guide/978793/advpn/978794/configuring-advpn

質問 # 89
Refer to the exhibit.

You are deploying a FortiGate 6000F. The device should be directly connected to a switch. In the future, a new hardware module providing higher speed will be installed in the switch, and the connection to the FortiGate must be moved to this higher-speed port.
You must ensure that the initial FortiGate interface connected to the switch does not affect any other port when the new module is installed and the new port speed is defined.
How should the initial connection be made?

A. Connect the switch on any interface between ports 25 to 28
B. Connect the switch on any interface between ports 21 to 24
C. Connect the switch on any interface between ports 1 to 4
D. Connect the switch on any interface between ports 5 to 8.

正解：B

解説：
The FortiGate 6000F is a high-performance firewall appliance that has 28 network interfaces with different speeds and types. The device should be directly connected to a switch that will have a new hardware module providing higher speed in the future. The connection to the FortiGate must be moved to this higher-speed port without affecting any other port. Therefore, the initial connection should be made on any interface between ports 21 to 24, which are 10G SFP+ interfaces. These interfaces are independent from each other and do not share bandwidth with any other interface. This means that moving the connection to a higher-speed port in the future will not affect any other port on the FortiGate. Option A shows the correct answer. Option B is incorrect because ports 25 to 28 are 40G QSFP+ interfaces, which share bandwidth with ports 21 to 24. Moving the connection to a higher-speed port in the future will affect the bandwidth of these ports. Option C is incorrect because ports 1 to 4 are 100G QSFP28 interfaces, which share bandwidth with ports 5 to 8 and ports 9 to 12. Moving the connection to a higher-speed port in the future will affect the bandwidth of these ports. Option D is incorrect because ports 5 to 8 are 25G SFP28 interfaces, which share bandwidth with ports 1 to 4 and ports 9 to 12. Moving the connection to a higher-speed port in the future will affect the bandwidth of these ports. Reference: https://docs.fortinet.com/document/fortigate/7.0.0/hardware-acceleration-guide/19662/fortigate-6000f

質問 # 90
Refer to the exhibit.

You have deployed a security fabric with three FortiGate devices as shown in the exhibit. FGT_2 has the following configuration:

FGT_1 and FGT_3 are configured with the default setting. Which statement is true for the synchronization of fabric-objects?

A. Objects from the root FortiGate will not be synchronized to any downstream FortiGate.
B. Objects from the root FortiGate will only be synchronized to FGT__2.
C. Objects from the root FortiGate will only be synchronized to FGT_3.
D. Objects from the FortiGate FGT_2 will be synchronized to the upstream FortiGate.

正解：D

解説：
The security fabric shown in the exhibit consists of three FortiGate devices connected in a hierarchical topology, where FGT_1 is the root device, FGT_2 is a downstream device, and FGT_3 is a downstream device of FGT_2. FGT_2 has a configuration setting that enables fabric-object synchronization for all objects except firewall policies and firewall policy packages (set sync-fabric-objects enable). Fabric-object synchronization is a feature that allows downstream devices to synchronize their objects (such as addresses, services, schedules, etc.) with their upstream devices in a security fabric. This simplifies object management and ensures consistency across devices. Therefore, in this case, objects from FGT_2 will be synchronized to FGT_1 (the upstream device), but not to FGT_3 (the downstream device). Objects from FGT_1 will not be synchronized to any downstream device because the default setting for fabric-object synchronization is disabled. Objects from FGT_3 will not be synchronized to any device because it does not have fabric-object synchronization enabled. Reference: https://docs.fortinet.com/document/fortigate/7.0.0/administration-guide/19662/fabric-object-synchronization

質問 # 91
......

だれでも成功したいのです。IT業界で働いているあなたはFortinetのNSE8_812試験の重要性を知っているのでしょう。FortinetのNSE8_812試験に参加する人はますます多くなっています。競争がこのように激しい情況で勝つためにどうしますか。ふさわしいアシスタントを選ぶのは一番重要なのです。CertJukenはFortinetのNSE8_812試験を長い時間で研究しますので、この試験を深く了解しています。我々提供するFortinetのNSE8_812ソフトであなたはきっと試験に合格できます。

NSE8_812模擬モード: https://www.certjuken.com/NSE8_812-exam.html

Fortinet NSE8_812練習問題集多くの候補者が当社の製品で合格点を取得します、ご覧のとおり、NSE8_812模擬試験はあまり時間をかけません、Fortinet NSE8_812練習問題集弊社が提供した製品は一部の無料試用資料がありますから、購入する前にあなたのテストの質と適用性を保証します、Fortinet NSE8_812練習問題集どんな困難にあっても、諦めないです、あらゆる種類の試験NSE8_812認定、あらゆる種類の資格認定を通してあなたを証明します、Fortinet NSE8_812練習問題集 100％返金保証-もし試験に失敗した場合、我々はあなたに全額返金します、NSE8_812 Fortinet NSE 8 - Written Exam (NSE8_812)準備資料の最新コンテンツで学習できるように、当社の専門家が毎日更新状況を確認し、彼らの勤勉な仕事と専門的な態度が練習資料に高品質をもたらします。

一番可愛いのは、ベッドで俺に啼かされている声だけどね楽しそうに、だNSE8_812けど、淫靡に微笑む課長の様子に、怒りと羞恥でカッとなる、春夜があまりにも魅力的なイキ顔を見せてくれたから、それを眺めていたかったんだよ。

NSE8_812練習問題集｜合格保証｜返金保証

多くの候補者が当社の製品で合格点を取得します、ご覧のとおり、NSE8_812模擬試験はあまり時間をかけません、弊社が提供した製品は一部の無料試用資料がありますから、購入する前にあなたのテストの質と適用性を保証します。

どんな困難にあっても、諦めないです、あらゆる種類の試験NSE8_812認定、あらゆる種類の資格認定を通してあなたを証明します。